Skip to content
My pc restarts 3 ti...
 
Notifications
Clear all

My pc restarts 3 times then i get 3 beeps

1 Posts
1 Users
0 Likes
0 Views
Guest
Illustrious Member
Joined: 4 months ago
Posts: 57372
Topic starter  

i had a problem with my pc 2 days ago ,in these 2 days i tried many methods to fix it but with no luck

it happened after shutting my pc and plugged out my vga card which is rx 470 to re add thermal paste ,after doing it , i put back the vga card and then the pc kept starts on then restart after 2 seconds it did this 3 times then 3 short slow beeps

and a red light which is on the board which is asrock h87 fatality ,the board has 2 bios 1 and 2 with a jumper to a recover

anyway ,i tried 1st thing to plug out the vga card again and try without out but ive got the same 3 beeps and restarts

tried the rams ,i have 3 rams which were working great a second before plugging out the vga card ,but i pulled them all and cleaned them and tried one by one with no luck same beeps and restarts ,i tried the bios 2 but i have got the same thing with the red light too ,tried to clear the cmos with no luck too ,got another cmos battery still same ,l did try another powersupply which did not work too , then last thing is to reseat the cpu and clean the pins ,it was good with no bent pint and put it back ,but still the same , i tried the built in vga card

hope if someone can help me with that ,thank you for your time


   
Quote

Unreplied Posts

Xubuntu freeze on lightdm login after upgrade to 22.04/22.10

I think it’s the first time, that I ask a question here, since I found an answer for all previous issues.
I upgraded my xubuntu 20.04 to 22.04 (and then on commandline to 22.10, because I hoped, the problem will solve itself. But it remains).
I can login from a text terminal but never more from lightdm. I enter my credentials, and then I see the background-image, the mouse-pointer can be moved, but nothing else is displayed. Restarting lightdm.service lets login me again, but the behavior is the same.
I also tried to switch to gdm3 (like suggested here), but it has the same effect (except the mouse freezes too).
The .xsession-errors has only a few entries:

dbus-update-activation-environment: setting DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus
dbus-update-activation-environment: setting DISPLAY=:0
dbus-update-activation-environment: setting XAUTHORITY=/home/wolfgang/.Xauthority
dbus-update-activation-environment: setting QT_ACCESSIBILITY=1 looks normal so far, 

also dmesg and syslog dont show any hint. Where could I continue the research?

This is the Xorg.0.log (Part1):

[   232.736] 
X.Org X Server 1.21.1.4
X Protocol Version 11, Revision 0
[   232.736] Current Operating System: Linux merlin 5.19.0-35-generic #36-Ubuntu SMP PREEMPT_DYNAMIC Fri Feb 3 18:36:56 UTC 2023 x86_64
[   232.736] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.19.0-35-generic root=UUID=696192c7-692f-4e04-9022-fd082eef9987 ro vga=0x31f
[   232.736] xorg-server 2:21.1.4-2ubuntu1.6 (For technical support please see http://www.ubuntu.com/support) 
[   232.736] Current version of pixman: 0.40.0
[   232.736]    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[   232.736] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   232.736] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 21 22:05:48 2023
[   232.737] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   232.737] (==) No Layout section.  Using the first Screen section.
[   232.737] (==) No screen section available. Using defaults.
[   232.737] (**) |-->Screen "Default Screen Section" (0)
[   232.737] (**) |   |-->Monitor "<default monitor>"
[   232.738] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[   232.738] (==) Automatically adding devices
[   232.738] (==) Automatically enabling devices
[   232.738] (==) Automatically adding GPU devices
[   232.738] (==) Automatically binding GPU devices
[   232.738] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   232.738] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   232.738]    Entry deleted from font path.
[   232.738] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[   232.738]    Entry deleted from font path.
[   232.738] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[   232.738]    Entry deleted from font path.
[   232.738] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[   232.738]    Entry deleted from font path.
[   232.738] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[   232.738]    Entry deleted from font path.
[   232.738] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/Type1,
    built-ins
[   232.738] (==) ModulePath set to "/usr/lib/xorg/modules"
[   232.738] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[   232.738] (II) Loader magic: 0x5570cf6f1020
[   232.738] (II) Module ABI versions:
[   232.738]    X.Org ANSI C Emulation: 0.4
[   232.738]    X.Org Video Driver: 25.2
[   232.738]    X.Org XInput driver : 24.4
[   232.738]    X.Org Server Extension : 10.0
[   232.739] (++) using VT number 7

[   232.739] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[   232.740] (II) xfree86: Adding drm device (/dev/dri/card0)
[   232.740] (II) Platform probe for /sys/devices/pci0000:00/0000:00:09.0/0000:02:00.0/drm/card0
[   232.744] (--) PCI:*(2@0:0:0) 1002:68f9:174b:e127 rev 0, Mem @ 0xe0000000/268435456, 0xfbfe0000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[   232.744] (II) LoadModule: "glx"
[   232.744] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   232.745] (II) Module glx: vendor="X.Org Foundation"
[   232.745]    compiled for 1.21.1.4, module version = 1.0.0
[   232.745]    ABI class: X.Org Server Extension, version 10.0
[   232.745] (II) Applying OutputClass "Radeon" to /dev/dri/card0
[   232.745]    loading driver: radeon
[   232.745] (==) Matched radeon as autoconfigured driver 0
[   232.745] (==) Matched ati as autoconfigured driver 1
[   232.745] (==) Matched modesetting as autoconfigured driver 2
[   232.745] (==) Matched fbdev as autoconfigured driver 3
[   232.745] (==) Matched vesa as autoconfigured driver 4
[   232.745] (==) Assigned the driver to the xf86ConfigLayout
[   232.745] (II) LoadModule: "radeon"
[   232.745] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[   232.746] (II) Module radeon: vendor="X.Org Foundation"
[   232.746]    compiled for 1.21.1.3, module version = 19.1.0
[   232.746]    Module class: X.Org Video Driver
[   232.746]    ABI class: X.Org Video Driver, version 25.2
[   232.746] (II) LoadModule: "ati"
[   232.746] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[   232.746] (II) Module ati: vendor="X.Org Foundation"
[   232.746]    compiled for 1.21.1.3, module version = 19.1.0
[   232.746]    Module class: X.Org Video Driver
[   232.746]    ABI class: X.Org Video Driver, version 25.2
[   232.746] (II) LoadModule: "modesetting"
[   232.746] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   232.746] (II) Module modesetting: vendor="X.Org Foundation"
[   232.746]    compiled for 1.21.1.4, module version = 1.21.1
[   232.746]    Module class: X.Org Video Driver
[   232.746]    ABI class: X.Org Video Driver, version 25.2
[   232.746] (II) LoadModule: "fbdev"
[   232.747] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   232.747] (II) Module fbdev: vendor="X.Org Foundation"
[   232.747]    compiled for 1.21.1.3, module version = 0.5.0
[   232.747]    Module class: X.Org Video Driver
[   232.747]    ABI class: X.Org Video Driver, version 25.2
[   232.747] (II) LoadModule: "vesa"
[   232.747] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   232.747] (II) Module vesa: vendor="X.Org Foundation"
[   232.747]    compiled for 1.21.1.3, module version = 2.5.0
[   232.747]    Module class: X.Org Video Driver
[   232.747]    ABI class: X.Org Video Driver, version 25.2
[   232.747] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
    ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
    ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,
    ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),
    ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),
    ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,
    ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,
    ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,
    ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,
    ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),
    ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,
    ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),
    ATI Radeon X800SE (R420), ATI FireGL X3 (R420),
    ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),
    ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),
    ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),
    ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),
    ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,
    ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,
    ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),
    ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,
    ATI Radeon 9800PRO, ATI Radeon 9800XT,
    ATI Radeon Mobility 9600/9700 (M10/M11),
    ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),
    ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),
    ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,
    ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,
    ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),
    ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),
    ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),
    ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),
    ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),
    ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),
    ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),
    ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),
    ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),
    ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,
    ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,
    ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),
    ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),
    ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),
    ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),
    ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),
    ATI Radeon X850, ATI unknown Radeon / FireGL (R480),
    ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),
    ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),
    ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),
    ATI Radeon X1800, ATI Mobility Radeon X1800 XT,
    ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,
    ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,
    ATI FireGL V3350, ATI Mobility Radeon X1450,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,
    ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,
    ATI FireGL V3400, ATI Mobility FireGL V5250,
    ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,
    ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,
    ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,
    ATI FireGL V7400, ATI Radeon 9100 PRO IGP,
    ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,
    ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,
    ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),
    ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
    ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,
    AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,
    ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
    ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,
    ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
    ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,
    ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,
    ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,
    ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,
    ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,
    ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,
    ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
    ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,
    ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
    ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,
    ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
    AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
    AMD Radeon HD 6300 Series Graphics,
    AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,
    ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    AMD Firestream 9350, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,
    REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,
    ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,
    AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
    AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,
    ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
    MULLINS, KAVERI, HAWAII
[   232.749] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   232.749] (II) FBDEV: driver for framebuffer: fbdev
[   232.749] (II) VESA: driver for VESA chipsets: vesa
[   232.758] (II) [KMS] Kernel modesetting enabled.
[   232.758] (WW) Falling back to old probe method for modesetting
[   232.758] (WW) Falling back to old probe method for fbdev
[   232.758] (II) Loading sub module "fbdevhw"
[   232.758] (II) LoadModule: "fbdevhw"
[   232.759] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   232.759] (II) Module fbdevhw: vendor="X.Org Foundation"
[   232.759]    compiled for 1.21.1.4, module version = 0.0.2
[   232.759]    ABI class: X.Org Video Driver, version 25.2
[   232.759] (II) RADEON(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[   232.759] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[   232.759] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[   232.759] (==) RADEON(0): Default visual is TrueColor
[   232.759] (==) RADEON(0): RGB weight 888
[   232.759] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[   232.759] (--) RADEON(0): Chipset: "ATI Radeon HD 5450" (ChipID = 0x68f9)
[   232.759] (II) Loading sub module "fb"
[   232.759] (II) LoadModule: "fb"
[   232.759] (II) Module "fb" already built-in
[   232.759] (II) Loading sub module "dri2"
[   232.759] (II) LoadModule: "dri2"
[   232.759] (II) Module "dri2" already built-in
[   232.829] (II) Loading sub module "glamoregl"
[   232.830] (II) LoadModule: "glamoregl"
[   232.830] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[   232.835] (II) Module glamoregl: vendor="X.Org Foundation"
[   232.835]    compiled for 1.21.1.4, module version = 1.0.1
[   232.835]    ABI class: X.Org ANSI C Emulation, version 0.4
[   232.853] (II) RADEON(0): glamor X acceleration enabled on AMD CEDAR (DRM 2.50.0 / 5.19.0-35-generic, LLVM 15.0.2)
[   232.853] (II) RADEON(0): glamor detected, initialising EGL layer.
[   232.853] (II) RADEON(0): KMS Color Tiling: enabled
[   232.853] (II) RADEON(0): KMS Color Tiling 2D: enabled
[   232.853] (==) RADEON(0): TearFree property default: auto
[   232.853] (II) RADEON(0): KMS Pageflipping: enabled
[   232.870] (II) RADEON(0): Output DVI-0 has no monitor section
[   232.902] (II) RADEON(0): Output DVI-1 has no monitor section
[   232.918] (II) RADEON(0): EDID for output DVI-0
[   232.950] (II) RADEON(0): EDID for output DVI-1
[   232.950] (II) RADEON(0): Manufacturer: SAM  Model: 2b5  Serial#: 1213542964
[   232.950] (II) RADEON(0): Year: 2008  Week: 13
[   232.950] (II) RADEON(0): EDID Version: 1.3
[   232.950] (II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[   232.950] (II) RADEON(0): Sync:  Separate  Composite  SyncOnGreen
[   232.950] (II) RADEON(0): Max Image Size [cm]: horiz.: 52  vert.: 32
[   232.950] (II) RADEON(0): Gamma: 2.60
[   232.950] (II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
[   232.950] (II) RADEON(0): First detailed timing is preferred mode
[   232.950] (II) RADEON(0): redX: 0.653 redY: 0.337   greenX: 0.295 greenY: 0.607
[   232.950] (II) RADEON(0): blueX: 0.144 blueY: 0.075   whiteX: 0.312 whiteY: 0.329
[   232.950] (II) RADEON(0): Supported established timings:
[   232.950] (II) RADEON(0): 720x400@70Hz
[   232.950] (II) RADEON(0): 640x480@60Hz
[   232.950] (II) RADEON(0): 640x480@67Hz
[   232.950] (II) RADEON(0): 640x480@72Hz
[   232.950] (II) RADEON(0): 640x480@75Hz
[   232.950] (II) RADEON(0): 800x600@56Hz
[   232.950] (II) RADEON(0): 800x600@60Hz
[   232.950] (II) RADEON(0): 800x600@72Hz
[   232.950] (II) RADEON(0): 800x600@75Hz
[   232.950] (II) RADEON(0): 832x624@75Hz
[   232.950] (II) RADEON(0): 1024x768@60Hz
[   232.950] (II) RADEON(0): 1024x768@70Hz
[   232.950] (II) RADEON(0): 1024x768@75Hz
[   232.950] (II) RADEON(0): 1280x1024@75Hz
[   232.950] (II) RADEON(0): 1152x864@75Hz
[   232.950] (II) RADEON(0): Manufacturer's mask: 0
[   232.950] (II) RADEON(0): Supported standard timings:
[   232.950] (II) RADEON(0): #0: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[   232.950] (II) RADEON(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[   232.950] (II) RADEON(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[   232.950] (II) RADEON(0): #3: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[   232.950] (II) RADEON(0): Supported detailed timing:
[   232.950] (II) RADEON(0): clock: 154.0 MHz   Image Size:  518 x 324 mm
[   232.950] (II) RADEON(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[   232.950] (II) RADEON(0): v_active: 1200  v_sync: 1203  v_sync_end 1209 v_blanking: 1235 v_border: 0
[   232.950] (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz

Thank you.

Cut points, continuous paths and increasing sequence of sets

$begingroup$

currently I have a question about the following point-set topology problem. Everything takes place in $(mathbb C,|cdot|)$ and we are given the following setup.

  1. One has a sequence of closed connected sets of points in the complex plane ${L_t}_{t geq 0}$ (the precise definition for this problem should be irrelavant) such that $L_t subseteq L_{t+s}$ for each $s > 0$. So basically as $t$ increases the set grows aswell.
  2. There exist continuous curves $gamma$ such that for each $t geq 0$ one has $gamma : [-t,t] to mathbb C$ such that $gamma([-t,t]) subseteq L_t$. Moreover we know especially that $gamma(t+s)$ and $gamma(-(t+s))$ are not in $L_t$ and together with another given property one can actually proof that $gamma(t)$ and $gamma(-t)$ are cut points of $L_{t+s}$ for $s > 0$. Using the definition found here this tells us (for example) that $L_{t+s} setminus gamma(t)$ is disconnected.

Question: We already have for each $t geq 0 : gamma([-t,t]) subseteq L_t$ I want to proof that one actually has equality, i.e. $L_t = gamma([-t,t])$.

Idea: Take for example $[a,b]$ in $mathbb R$ then every point $c in (a,b)$ is a cutpoint, the important take away here is that the ”end-points” of the interval $[a,b]$ are not cutpoints. Here something similiar should be possible. Since $gamma(t)$ is a cut point of $L_{t+s}$ it cannot be that that $L_{t+s} setminus L_t$ did not grow ”along” $gamma(t)$. Growing say along the middle of the curve around $gamma(t/2)$ should contradict some combination of the notion of cut point and continuity of $gamma$ but I find it hard to write down precisely.

Thanks in advance!

$endgroup$

ref{xyz} with usepackage{hyperref} not working correctly

I use pdfTeX, Version 3.141592653-2.6-1.40.24 (TeX Live 2022) (preloaded format=pdflatex)

I put label on sections, figures, etc.

I include usepackage[colorlinks=true,urlcolor=blue]{hyperref}

I had been using texlive 2016. Until I installed texlive 2022, ref{xyz} produced only the number for xyz.

Now it includes the number, the title (section name, figure caption, …) what it is (section, figure, …) and then the number again.

For example, with an equation having label{Flow}, when I wrote “Equation (ref{Flow})” I used to get “Equation (2)”. Now I get “Equation (2Flowequation.3.2)”

This occurs both using documentclass{article} and a proprietary class for a professional journal. I haven’t tried others.

I’ve “compiled” in a fresh directory, so it’s not due to confusion caused by an old .aux file.

Without including hypeffef, I get only the number — but of course no hyperlink.

Is there a repair for this?

Is there a Wayland diagnostic to check for supported display resolutions?

So far as I can tell, the listed resolutions:

nicholas@mordor:~$ 
nicholas@mordor:~$ cat /sys/class/drm/card0/card0-VGA-1/modes 
1024x768
800x600
800x600
848x480
640x480
nicholas@mordor:~$ 
nicholas@mordor:~$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description:    Ubuntu 22.04 LTS
Release:    22.04
Codename:   jammy
nicholas@mordor:~$ 

match what is shown in setting exactly. However, prior to logging out, higher resolutions were available.

Is there a diagnostic to re-check supported resolutions?

Is $ mu(E times F) leq nu(E times F) forall (E,F) implies mu(A) leq nu(A) forall A in mathcal{E} otimes mathcal{F} $ true?

$begingroup$

Let $(X,mathcal{E})$ and $(Y,mathcal{F})$ denote two measurable spaces and let $mu,nu$ denote two finite measures on $(X times Y, mathcal{E} otimes mathcal{F})$, where $mathcal{E} otimes mathcal{F}:= sigma(mathcal{E} times mathcal{F})$. Consider the claim

$$
mu(E times F) leq nu(E times F) text{ for all } (E,F) in mathcal{E} times mathcal{F} implies mu(A) leq nu(A) text{ for all } A in mathcal{E} otimes mathcal{F}.
$$

Question: Is this claim true?


Attempt:

Define the set $$
M = {A in mathcal{E} otimes mathcal{F} colon mu(A) leq nu(A)}.
$$

Then we want to show that $M = mathcal{E} otimes mathcal{F}$. Note that clearly $M subseteq mathcal{E} otimes mathcal{F}$. For the other inclusion, we have by assumption that $mathcal{E} times mathcal{F} subseteq M$ so it follows that $mathcal{E} otimes mathcal{F}= sigma(mathcal{E} times mathcal{F}) subseteq sigma (M)$ and hence it would suffice to show $M$ is a $sigma$-algebra.

However I am not sure this is the case. I can’t seem to show that $M$ is closed under complements and countable unions. In particular say for the union part, we can do the following:
$$
mu(bigcup_{n in mathbb{N}}A_n) leq sum_{n in mathbb{N}} mu(A_n) leq sum_{n in mathbb{N}} nu(A_n),
$$

but then we cannot go back to $nu(bigcup_{n in mathbb{N}}A_n)$. So this is where I am stuck.

I have also tried to look at Dynkin’s $pi$-theorem but at least I could not see how this was useful here.

Also I haven’t been able to come up with any counterexample yet.


As a final remark, I will just need to apply this result for $mathcal{E},mathcal{F} = mathcal{B(mathbb{R}^d}),mathcal{B(mathbb{R}^m})$ but I would like to prove it higher generality if this is indeed possible. If this is not possible, are there any conditions we can impose for it to hold? Any feedback/help is much appreciated!

$endgroup$

Problem to define a key and the associated value of a table from a variable

I’m sorry for the imprecision of my question but I couldn’t find a way to describe my problem correctly.

I created a new package and in the “lua” part, I use two classes, one for points and the other for lines. Two tables z and L are associated to these classes. In the first one are stored the points and in the second the lines.
For example for points z.a = point: new (1,2). This defines the point a whose affix (complex number) is 1+2i. In the table here the key is a and the value 1+2i . In the same way if a and b are defined, I can define a line with for example L.a__b = line: new (z.a,z.b). This is a bit more complicated because tables are stored in a table.

I may be wrong but I think my problem can be translated like this:
If x=a and y=b then how do I define a function that gives me L.a__b = line: new (z.a,z.b), L.x__y etc. gives nothing.

The package can be found on this page tkz-elements. You will find in the archive the code of tkz-elements a readme and a small documentation and several examples. All this is still experimental!

Here is the more complete code:

documentclass{article}
usepackage{tkz-euclide}
usepackage{tkz-elements}
begin{document}
parindent = 0pt

begin{elements}
z.a = point: new (0, -1)
z.b = point: new (4, 2)
z.c = point: new (1, 2)
z.d = point: new (-1, 3)
L.a__b = line: new (z.a,z.b)
L.a__d = line: new (z.a,z.d)
L.d__b = line: new (z.d,z.b)
-- L.c__d = line: new (z.c,z.d)
-- z.i =intersection_ll_ (L.a__b,L.c__d)

va = tostring(c__d)
 for i in pairs(L) do
   if i == va then 
   else
      _, _,ft, sd = string.find( "c__d", "(.+)__(.+)" )    
      L["ft__sd"] = line: new (z.ft,z.sd)  -- wrong !
      --  tex.print(ft..'__'..sd)   -- to show the values of ft and sd
     break
   end
 end

 -- the next code is here to show the different values
for i,k in pairs(L) do
 tex.print(tostring(k)..";"..tostring(i))
 for u,v in pairs(k)  
    do 
       tex.print(tostring(v)) 
  end
 tex.print('\\')
 end
end{elements}

begin{tikzpicture}
 tkzGetNodes

 tkzDrawLines[add=1 and 1](a,b c,d)
 tkzDrawPoints(a,b,c,d)
tkzLabelPoints(a,b,c,d)
end{tikzpicture}
end{document}

Some explanations: 4 points are defined then 4 lines but I commented the last one L.c__d to show my problem.
The code allows to get the intersection of two lines if they are defined. I would like to find a test to know if one of them is not defined and in this case create it automatically.
Having commented L.c__d = line: new (z.c,z.d) this line is no longer defined. So I parse the expression representing this line with the string.find function and get ft and sd which point to c and d.

Question: How can I use ft and sd to get L.c__d = line: new (z.c,z.d)?

enter image description here

AppImage .desktop file not showing on dock

I’m on Ubuntu 22.04.2 LTS.
I have two .desktop executable files for the Keet AppImage in my .local/share/applications folder.
I didn´t create them they have been created by the app I suppose.
However they are both not showing on my dock (I have Dash to Dock installed).
All the others AppImages are showing.
If I run them form the terminal with gtk-launch keet or gtk-launch appimagekit_8d9752879526b100ab8504901c9bd0a4-Keet the app starts succesfully.
Removing one of the two files and restarting the system does not fix the issue.
What can be the reason and how can I solve the issue?
The content of the files is:

[Desktop Entry]
Name=Keet
Exec=/home/giovanni/snap/Keet_7695b52a4e54b87f751f760f6ab65255.AppImage %U
Terminal=false
Icon=keet
Type=Application
StartupWMClass=Keet
X-AppImage-Version=1.0.1
Comment=Keet
MimeType=x-scheme-handler/punch;x-scheme-handler/holepunch

and :

[Desktop Entry]
Name=Keet
Exec=/home/giovanni/snap/Keet_7695b52a4e54b87f751f760f6ab65255.AppImage
Icon=appimagekit_8d9752879526b100ab8504901c9bd0a4_keet
Type=Application
Categories=Network;AudioVideo;

TryExec=/home/giovanni/snap/Keet_7695b52a4e54b87f751f760f6ab65255.AppImage
X-AppImage-Old-Icon=keet
X-AppImage-Identifier=8d9752879526b100ab8504901c9bd0a4
Actions=Remove;
X-AppImageLauncher-Version=2.2.0 (git commit 0f91801), built on 2020-09-29 21:36:15 UTC

How to install Ubuntu server 20.04 with UEFI (non gui)

I have done this before but the current ISO installer does not match my notes from previous installs.

ISO: ubuntu-20.04.5-live-server-amd64 using non gui installer via idrac.

get to disk partitioning
select disk
enter image description here

the only option is to add a GPT partition

enter image description here

and no option to format as ESP.

How should I create a /boot partition for UEFI?

All the stuff I turned up in searching used the GUI install where the dialogue was different.

Elements of the coset G/H, where G=$GL^+$(2) and H=SO(2)

$begingroup$

In this paper1 in section 2, a method to write the elements of the coset of G/H is provided for GL(4), but I am interested in $GL^+$(2).

My matrix representation of $mathfrak{gl}(2)$ is

$$
begin{bmatrix}
a+x& -b+y\
b+y & a-x
end{bmatrix}
$$

My matrix representation of $mathfrak{so}(2)$ is

$$
begin{bmatrix}
0& -b\
b & 0
end{bmatrix}
$$


Reading the paper, it states that the element g of G can be decomposed as g=$gamma$h, where

$$
gamma = exp left( begin{bmatrix}
a+x& +y\
y & a-x
end{bmatrix} right) in G/H
$$

and where

$$
h = exp left( begin{bmatrix}
0& -b\
b & 0
end{bmatrix} right) in H
$$

Is this correct, or no?

I am suspicious of the argument, because to me

$$
exp left( begin{bmatrix}
a+x& y\
y & a-x
end{bmatrix} right)exp left( begin{bmatrix}
0& -b\
b & 0
end{bmatrix} right) neq exp left( begin{bmatrix}
a+x& -b+y\
b+y & a-x
end{bmatrix} right)
$$

Thus, $gamma h$ does not appear to realize all elements of $G$. Or do we not care about some missing elements for cosets?

$endgroup$

Project not working after moving to WSL directory

My dockerized Lumen project had slow response time so according to advices I moved my project from my classic path C:Mgrlumen_laravellumenmysql to wsl.localhostUbuntuhomesamolumenmysql, then created Z: drive so I can open terminal in that location and run “docker-compose up -d”.
In previous adress it was working.I didnt change any code and have got error. Any advices? Thank you.

error in docker

2023-03-21 22:49:00 AH00112: Warning: DocumentRoot [/var/www/html/public] does not exist

According to docker inspect Mount info it exists

/VAR/WWW/HTML Z:homesamolumenmysql

docker-compose.yml

version: '3.8'

services:


   mysqldb:
    image: mysql:5.7
    container_name : mysqldb
    restart: always
    volumes:
      - ${DOCKER_MYSQL_VOLUME:-/opt/db_data}:/var/lib/mysql
    ports:
      - "3306:3306"
    environment:
     MYSQL_DATABASE: diplomovka
     MYSQL_ROOT_PASSWORD: 1234

   phpmyadmin:
     image: phpmyadmin/phpmyadmin
     container_name: phpmyadmin
     environment:
       PMA_HOST: mysqldb
       DB_READ_HOST: mysqldb
     ports:
       - "3400:80"
     depends_on:
       - mysqldb

   app:
     container_name: Lumen
     build:
       context: .
       dockerfile: Dockerfile
     volumes:
       - ./:/var/www/html
     restart: ${DOCKER_RESTART_POLICY:-always}
     ports:
       - "9000:80"
     working_dir: /var/www/html
     environment:
       MYSQL_HOST: mysqldb
       MYSQL_USER: root
       MYSQL_PASSWORD: 1234
       MYSQL_PORT: 3306

vhost.conf

<VirtualHost *:80>
    ServerName localhost

    DocumentRoot /var/www/html/public

    <Directory "/var/www/html">
        AllowOverride all
        Require all granted
    </Directory>

    ErrorLog ${APACHE_LOG_DIR}/error.log
    CustomLog ${APACHE_LOG_DIR}/access.log combined
</VirtualHost>

Dockerfile

FROM php:7.4.19-apache

WORKDIR /var/www/html

RUN apt-get update && apt-get install -y  
        zlib1g-dev 
        libzip-dev 
        libonig-dev 
        curl 

    && docker-php-ext-install pdo_mysql 
    && docker-php-ext-install mysqli 
    && docker-php-source delete

COPY ./vhost.conf /etc/apache2/sites-available/000-default.conf

COPY ./ ./

RUN curl -sS https://getcomposer.org/installer | php -- --install-dir=/usr/local/bin --filename=composer

RUN chown -R www-data:www-data /var/www/html 
    && a2enmod rewrite

RUN cd /var/www/html && composer install && php artisan key:generate

Share: